Bell System CS106 Manuel d'utilisateur télécharger pdf (Page 12)

C106 Keypad

Programming a Lock Delay Time (Function 96)

This function causes a delay (0-99 seconds) to be introduced between the

triggering of the lock release and its operation. Typically, this facility is used

when the keypad is located some distance from the entrance.

Procedure

— Enter the security key.

— Type :

96 * <0-99> #

— Both LEDs flash once

— Exit program mode by

pressing **

Example

96 * 3 #

(3 second delay)

Factory Setting = 0 seconds

C106 Keypad

Programming the Factory Settings (Function 99)

In the event of any problems, always return to Factory settings.

Procedure

— Enter the security key.

— Type : 99 * #

— Both LEDs flash once

— Exit program mode by

pressing **

If you have forgotten the

security key see

‘Programming the Factory

Defaults Using the Test

Button’ page 30

No Function Factory Setting

1 Program Code 1 1 2 3 4 5

2 Program Code 2 6 7 8 9 0

3 - 10 Program Codes 3 to 10 Disabled

51 Code 1 Action Number 1 (Operate always)

52 Code 2 Action Number 2 (Operate when Time closed)

53 - 60 Code 3 to 10 Action Numbers 0 (Disabled)

91 Security key 1 2 12

95 Lock Duration 3 seconds

96 Lock Delay 0 (Disabled)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 22 23

Pas de commentaire

Bell System CS106 Manuel d'utilisateur Page 12