Bell System bellissimo Spécifications télécharger pdf (Page 37)

bellissimo 2-72 Way Video Entry System

PD-098 Issue 3C Installation and Operating Manual Page 37 of 40

Diagram J – bellissimo Combined System Connections

Connecting a Bellcode Coded Access Controller

Connect the lock release as per this manual. Leave the Bellcode controller set

to fail secure, the BSD controller sets the lock type.

See "Bellcode Manual inc CK200 CS109 (PD-078)" for the other installation and

setting instructions.

Note 1. A normally open exit button can still be wired to the Bellcode unit in addition to

the bellissimo wiring.

Note 2. A “12V -” connection will be required if the 2 units are not sharing a power

supply.

Connecting a Bell PAX1 Proximity Reader

Connect the lock release as per this manual. Leave the Proximity Reader set to

fail secure, the BSD controller sets the lock type.

Note 1. A normally open exit button can still be wired to the BSD controller in addition to

the proximity wiring.

Opening a Gate or Locks on Third Party Systems

Leave the BSD controller set to Fail secure.

Use COM and NO or COM and NC as required for the gate controller or third

party access system.

1 2 ... 32 33 34 35 36 37 38 39 40

Pas de commentaire

Bell System bellissimo Spécifications Page 37